Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ISO 1183 | | g/cm |
| Chlorine content | | | | wt% |
| ash content | | | | % |
| Average particle size | | | | mm |
| Volatile substance content | | | | % |
| Apparent density | | 内部方法 | 0.40 | g/cm³ |
| Chlorine content | | ISO1158 | 36.0 | wt% |
| oils | 大豆油 | 内部方法 | 3.0 | phr |
| Ash Content | | ISO247 | <2.0 | % |
| Volatile compounds | | ISO248 | <0.30 | % |
| Average particle size | | ISO2591-1 | 250 | µm |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| tensile strength | 100% Strain | ISO 37 | 1.6 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Fusion heat | | 内部方法 | <2.00 | J/g |
| elastomer | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile stress | 100%应变 | ISO37 | 1.60 | Mpa |
| Filling analysis | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt viscosity | | ISO11443 | 2400 | Pa·s |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt viscosity | | ISO 11443 | | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices