Technical Data Sheet
Test Condition | Test Method | Test Result | |
---|---|---|---|
Heat distortion temperature | ASTM D648 | 67.2to92.2 °C | |
vicat | ASTM D1525 | 97.1to106 °C | |
transmissivity | ASTM D1003 | 89.0to92.8 % | |
Haze ratio | ASTM D1003 | 0.30to1.0 % | |
density | ASTM D792 | 1.04to1.09 g/cm³ | |
melt mass-flow rate | ASTM D1238 | 0.40to2.5 g/10min | |
Shrinkage rate | ASTM D955 | 0.40to0.41 % | |
Tensile modulus | ASTM D638 | 2850to3450 MPa | |
tensile strength | ASTM D638 | 5.00to64.8 MPa | |
elongation | ASTM D638 | 2.1to21 % | |
Flexural modulus | ASTM D790 | 1810to3380 MPa | |
bending strength | ASTM D790 | 98.9to101 MPa | |
Impact strength of cantilever beam gap | ASTM D256 | 16to34 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top