Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.37 g/cm³ |
| Melt volume flow rate | | ISO 1133 | 70.0 cm3/10min |
| Shrinkage rate | | ISO 294-4 | 0.86 % |
| Shrinkage rate | | ISO 294-4 | 0.82 % |
| Water absorption rate | | ISO 62 | 2.2 % |
| Water absorption rate | | ISO 62 | 0.80 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| ball-indentation hardness | | ISO 2039-1 | 154 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| UL flame retardant rating | | UL 94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179 | 7.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179 | NoBreak |
| Impact strength of simply supported beam without notch | | ISO 179 | NoBreak |
| Impact strength of cantilever beam gap | | ISO 180 | 7.5 kJ/m² |
| Impact strength of cantilever beam gap | | ISO 180 | 7.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179 | 7.5 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 2650 Mpa |
| tensile strength | | ISO 527-2 | 85.0 Mpa |
| Tensile strain | | ISO 527-2 | 6.9 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | >1.0E+15 ohms |
| Volume resistivity | | IEC 60093 | >1.0E+13 ohms·cm |
| dielectric strength | | IEC 60243-1 | 37 KV/mm |
| dielectric constant | | IEC 60250 | 3.90 |
| dielectric constant | | IEC 60250 | 3.80 |
| Dissipation Factor | | IEC 60250 | 1.7E-03 |
| Dissipation Factor | | IEC 60250 | 0.014 |
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 4 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| RTI Imp | | UL 746 | 180 °C |
| RTI Imp | | UL 746 | 180 °C |
| RTI Str | | UL 746 | 190 °C |
| RTI Str | | UL 746 | 190 °C |
| Heat distortion temperature | | ISO 75-2/A | 205 °C |
| Linear coefficient of thermal expansion | | | 5.2E-05 cm/cm/°C |
| RTI Elec | | UL 746 | 180 °C |
| RTI Elec | | UL 746 | 180 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices