TEEE RTP 1507-40D
0
- Properties:Fillerglass fiber reinforced material40%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.47 g/cm³ | |
| Shrinkage rate | ASTMD955 | 0.11到0.15 % | |
| water content | <0.10 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD2240 | 57 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Primary Additive | 40 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 410 J/m | |
| Suspended wall beam without notch impact strength | ASTMD4812 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 1310 MPa | |
| tensile strength | ASTMD638 | 30.7 MPa | |
| elongation | Yield | ASTMD638 | >10 % |
| Flexural modulus | ASTMD790 | 1170 MPa | |
| bending strength | ASTMD790 | 32.8 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top