
PBT 1184G-A30 TORAY SHENZHEN
135
Form:Granules | Grade:Enhanced level
Properties:
High toughnessFlame retardantFiller: Glass fiber reinf15%Filler by weight
Typical Applications:
Electrical components
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical components |
| Properties: | High toughness | Flame retardant | Filler: Glass fiber reinf | 15% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 35 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 0.8mm | UL 94 | V-0 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile strain | Break,23°C | ISO 527-2 | 2.5 | % |
| tensile strength | Yield,23°C | ISO 527-2 | 110 | Mpa |
| Tensile modulus | 23°C | ISO 527-2 | 6900 | Mpa |
| Friction coefficient vs. Metal | SuzukiMethod | 0.15 | ||
| Friction coefficient | 0.20 | |||
| bending strength | 23°C | ISO 178 | 170 | Mpa |
| Bending modulus | 23°C | ISO 178 | 6500 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD:-30to100°C | ISO 11359-2 | 5.3E-05 | cm/cm/°C |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 205 | °C |
| 0.45MPa,Unannealed | ISO 75-2/B | 220 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.070 | % |
| Shrinkage rate | MD:3.00mm4 | Internal Method | 0.50 | % |
| TD:3.00mm2 | Internal Method | 1.2 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 2 | |
| Arc resistance | IEC 60950 | 135 | sec | |
| Dissipation factor | 23°C,1MHz | IEC 60250 | 0.020 | |
| 23°C,50Hz | IEC 60250 | 2E-03 | ||
| Dielectric constant | 23°C,1kHz | IEC 60250 | 3.80 | |
| 23°C,50Hz | IEC 60250 | 3.60 | ||
| Dielectric strength | IEC 60243-1 | 14 | KV/mm | |
| Volume resistivity | IEC 60093 | 5.6E+16 | ohms·cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | M-Sale,23°C | ISO 2039-2 | 85 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| BarFlowLength | 250°C,1.00mm | Internal Method | 140 | mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.