Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D955 | 0.20 到 0.40 % |
| Water absorption rate | | ASTM D570 | 1.7 % |
| Shrinkage rate | | ASTMD955 | 0.20到0.40 % |
| Water absorption rate | | ASTMD570 | 1.7 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 120 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 120 |
| tensile strength | | ASTM D638 | 107 Mpa |
| elongation | | ASTM D638 | 3.0 % |
| Flexural modulus | | ASTM D790 | 6890 Mpa |
| bending strength | | ASTM D790 | 172 Mpa |
| Impact strength of cantilever beam gap | | ASTM D256 | 69 J/m |
| tensile strength | | ASTMD638 | 107 Mpa |
| elongation | | ASTMD638 | 3.0 % |
| Flexural modulus | | ASTMD790 | 6890 Mpa |
| bending strength | | ASTMD790 | 172 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D149 | 23 KV/mm |
| dielectric strength | | ASTMD149 | 23 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTM D648 | 210 °C |
| | ASTM D789 | 220 °C |
| Linear expansion coefficient | | ASTM D696 | 0.000060 cm/cm/℃ |
| UL flame retardant rating | | UL 94 | V-0 |
| | ASTMD789 | 220 °C |
| | ASTMD696 | 6E-05 cm/cm/°C |
| | ASTMD648 | 210 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices