TPEE 5526 DUPONT TAIWAN

Form：Granules | Grade：Injection grade

Properties:

Thermal stabilityHigh mobilityUV resistanceWeather resistancecurrency

Typical Applications:

Automotive sectorElectrical fieldElectronic fieldElectrical appliancesFitness equipment

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Electrical field \| Electronic field \| Electrical appliances \| Fitness equipment
Properties:	Thermal stability \| High mobility \| UV resistance \| Weather resistance \| currency

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	NoBreak
Impact strength of cantilever beam gap	23°C	ISO 8256/1	270	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Burning rate	1.00mm	ISO 3795	28	mm/min
UL flame retardant rating	1.5mm	UL 94	HB
	UL flame retardant rating	3.0mm	UL 94	HB
		UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	HB
		UL flame retardant rating	UL flame retardant rating	3.0mm	IEC 60695-11-10,-20	HB
Extreme Oxygen Index		ISO 4589-2	21	%
FMVSS flammability		FMVSS302	SE/B
Fogging-G-value	condensate	ISO 6452	1E-04	g
elastomer	Test Condition	Test Method	Test Result	Test Unit
tear strength	横向Flow	ISO 34-1	130	kN/m
tear strength	tear strength	Flow	ISO 34-1	130	kN/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	190	Mpa
tensile strength	Yield	ISO 527-2	15.0	Mpa
	tensile strength	Break	ISO 527-2	40.0	Mpa
		tensile strength	5.0%Strain	ISO 527-2	6.90	Mpa
			tensile strength	10%Strain	ISO 527-2	11.0	Mpa
			tensile strength	tensile strength	50%Strain	ISO 527-2	14.0	Mpa
Tensile strain	Yield	ISO 527-2	35	%
Tensile strain	Tensile strain	Break	ISO 527-2	>300	%
Nominal tensile fracture strain		ISO 527-2	780	%
Tensile creep modulus	1hr	ISO 899-1	170	Mpa
Tensile creep modulus	Tensile creep modulus	1000hr	ISO 899-1	130	Mpa
Bending modulus		ISO 178	200	Mpa
Wear resistance		ISO 4649	120	mm³
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	TD：--	ISO 11359-2	2E-04	cm/cm/°C
	Linear coefficient of thermal expansion	TD：-40to23°C	ISO 11359-2	1.7E-04	cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：EffectiveThermalDiffusivity	ISO 11359-2	9E-08	m²/s
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	65.0	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	45.0	°C
Brittle temperature		ISO 974	-98.0	°C
Glass transition temperature		ISO 11357-2	-20.0	°C
Vicat softening temperature	--	ISO 306/A50	180	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B50	75.0	°C
Melting temperature		ISO 11357-3	203	°C
Linear coefficient of thermal expansion	MD：--	ISO 11359-2	2E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：-40to23°C	ISO 11359-2	1.8E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ISO 1133	18	g/10min
Melt Volume Flow Rate (MVR)	220°C/2.16kg	ISO 1133	17.5	cm3/10min
Shrinkage rate	TD	ISO 294-4	1.4	%
Shrinkage rate	Shrinkage rate	MD	ISO 294-4	1.4	%
Water absorption rate	23°C,24hr	ISO 62	0.60	%
	Water absorption rate	Saturation,23°C,2.00mm	ISO 62	0.60	%
	Water absorption rate	Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	0.20	%
MediumDensity			1.04	g/cm³
SpecificHeatCapacity of Melt			2110	J/kg/°C
ThermalConductivityofMelt			0.19	W/m/K
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	>1.0E+15	ohms
Volume resistivity		IEC 60093	4E+13	ohms·cm
Dielectric strength		IEC 60243-1	20	KV/mm
Relative permittivity	100Hz	IEC 60250	4.90
Relative permittivity	Relative permittivity	1MHz	IEC 60250	4.60
Dissipation factor	100Hz	IEC 60250	9E-03
Dissipation factor	Dissipation factor	1MHz	IEC 60250	0.038
Compared to the anti leakage trace index		IEC 60112	PLC 0
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ISO 868	55
Shore hardness	Shore hardness	ShoreD,15Sec	ISO 868	51
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Odor		VDA270	5.00

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top