TPE EL250 DSM HOLAND

Form：Granules | Grade：Injection grade

Properties:

High impact resistanceLow temperature resistanc

Typical Applications:

Electrical applicationsAutomotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical applications \| Automotive Applications
Properties:	High impact resistance \| Low temperature resistanc

Certificates

No Data...

Technical Data Sheet

Filling analysis	Test Condition	Test Method	Test Result	Test Unit
Melt density			0.905	g/cm³
impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ISO 8256/1	No Break
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	25.0	Mpa
tensile strength	Break	ISO 527-2	16.0	Mpa
	tensile strength	5.0% Strain	ISO 527-2	1.20	Mpa
		tensile strength	10% Strain	ISO 527-2	2.10	Mpa
			tensile strength	50% Strain	ISO 527-2	4.40	Mpa
			tensile strength	tensile strength	100% Strain	ISO 527-2	5.10	Mpa
Tensile strain	Break	ISO 527-2	> 300	%
Nominal tensile fracture strain		ISO 527-2	900	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Glass transition temperature	--2	ISO 11357-2	-80.0	°C
Glass transition temperature	Glass transition temperature	--3	ASTM D5026/D7028	-74.0	°C
Melting temperature		ISO 11357-3	180	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	2.2E-4	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	2.2E-4	cm/cm/°C
RTI Elec	1.5 mm	UL 746	50.0	°C
RTI Imp	1.5 mm	UL 746	50.0	°C
RTI	1.5 mm	UL 746	50.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Apparent density		ISO 60	0.65	g/cm³
Melt Volume Flow Rate (MVR)	230°C/2.16 kg	ISO 1133	41.0	cm3/10min
Water absorption rate	Saturation, 23°C	ISO 62	0.80	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	5.0E+14	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore A, 3 Sec	ISO 868	85
Shore hardness	Shore hardness	Shore D, 3 Sec	ISO 868	25

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top