PA6 B3EG6 BASF GERMANY

111

Form：Granules | Grade：Injection grade

Properties:

Oil resistantFiller: Glass fiber reinf30% filler by weight

Typical Applications:

Electronic insulationIndustrial applicationsIndustrial applicationsElectronic insulation

Supplier(1)

Product Description

Certificates(1)

Datasheet

Alternative Model(5)

Product Description

Typical Applications:	Electronic insulation \| Industrial applications \| Industrial applications \| Electronic insulation
Properties:	Oil resistant \| Filler: Glass fiber reinf \| 30% filler by weight

Certificates

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ISO 180/1A	10	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C	ISO 180/1A	8.4	kJ/m²
tensile strength	23°C	ISO 527-2	180	Mpa
Elongation at Break	23°C	ISO 527-2	3.0	%
Tensile modulus	23°C	ISO 527-2	9500	Mpa
Bending modulus	23°C	ISO 178	8600	Mpa
Charpy Notched Impact Strength	23°C	ISO 179/1eA	10	kJ/m²
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPaUnannealed	ISO 75-2/Bf	220	°C
Hot deformation temperature	Hot deformation temperature	1.80MPaAnnealed	ISO 75-2/Af	210	°C
Vicat softening temperature	Melting Temperature	ISO 11357-3	220	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.36	g/cm³
Water absorption rate	(23°C,24hr)	ISO 62	6.00	%
Water absorption rate	Water absorption rate	(23°C,50RH)	ISO 62	2.10	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	1E+13	Ω.cm
Dielectric constant	23°C	IEC 60250	3.80	1MHz
Dissipation factor	23°C	IEC 60250	0.025	100HZ
	Dissipation factor	23°C	IEC 60250	0.025	1MHz
	Dissipation factor	Dissipation factor	相对漏电起痕指数	IEC 60112	550	V
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	181	Mpa
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL -94	HB	1.50mm
	UL flame retardant rating		UL -94	HB	2.00mm
	UL flame retardant rating	UL flame retardant rating		UL -94	HB	3.00mm
Ignition temperature of heating wire	1.00mm	IEC 60695-2-12	750	°C
	Ignition temperature of heating wire	2.00mm	IEC 60695-2-12	800	°C
	Ignition temperature of heating wire	Ignition temperature of heating wire	3.00mm	IEC 60695-2-12	750	°C
Relative temperature of heating wire	1.00mm	IEC 60695-2-13	725	°C
	Relative temperature of heating wire	2.00mm	IEC 60695-2-13	775	°C
	Relative temperature of heating wire	Relative temperature of heating wire	3.00mm	IEC 60695-2-13	725	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top