PPA HTNFR52G30LX NC010 DUPONT USA

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedFlame retardant

Typical Applications:

Automotive ApplicationsElectrical applicationsbuilding materials

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| Electrical applications \| building materials
Properties:	Glass fiber reinforced \| Flame retardant

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	45	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	40	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	V-0
	UL flame retardant rating	1.5mm	UL 94	V-0
		UL flame retardant rating	0.75mm	UL 94	V-0
		UL flame retardant rating	UL flame retardant rating	0.75mm	IEC 60695-11-10,-20	V-0
Hot filament ignition temperature	0.40mm	IEC 60695-2-13	700	°C
	Hot filament ignition temperature	0.75mm	IEC 60695-2-13	725	°C
	Hot filament ignition temperature	Hot filament ignition temperature	3.0mm	IEC 60695-2-13	800	°C
Extreme Oxygen Index		ISO 4589-2	37	%
FMVSS flammability		FMVSS302	DNI
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ISO 178	9000	Mpa
Tensile strain	Break	ISO 527-2	2.2	%
tensile strength	Break	ISO 527-2	150	Mpa
Tensile modulus		ISO 527-2	10500	Mpa
bending strength		ISO 178	230	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD：--	ISO 11359-2	2E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：-40to23°C	ISO 11359-2	2E-05	cm/cm/°C
		Linear coefficient of thermal expansion	MD：55to160°C	ISO 11359-2	2E-05	cm/cm/°C
			Linear coefficient of thermal expansion	TD：--	ISO 11359-2	6E-05	cm/cm/°C
			Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：-40to23°C	ISO 11359-2	6E-05	cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	283	°C
Melting temperature		ISO 11357-3	310	°C
RTI Elec	3.0mm	UL 746	140	°C
	RTI Elec	1.5mm	UL 746	140	°C
		RTI Elec	0.75mm	UL 746	140	°C
		RTI Elec	RTI Elec	0.40mm	UL 746	140	°C
Linear coefficient of thermal expansion	TD：55to160°C	ISO 11359-2	1E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD	ISO 294-4	0.30	%
Shrinkage rate	Shrinkage rate	TD	ISO 294-4	1.0	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index		IEC 60112	PLC 0
Dissipation factor	1MHz	IEC 60250	0.012
Dissipation factor	Dissipation factor	100Hz	IEC 60250	6.5E-03
Relative permittivity	1MHz	IEC 60250	3.90
Relative permittivity	Relative permittivity	100Hz	IEC 60250	4.10
Dielectric strength		IEC 60243-1	36	KV/mm
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Odor		VDA270	3.50

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top