
PC/ABS MB-1700 MITSUBISHI ENGINEERING JAPAN
137
Form:Granules
Properties:
Flame retardant
Typical Applications:
Electronic and Electrical Applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electronic and Electrical Applications |
| Properties: | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Elongation at Break | ASTM D638/ISO 527 | 55 | % | |
| Tensile modulus | ASTM D638/ISO 527 | 3200 | kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 61 | % | |
| Bending modulus | ASTM D790/ISO 178 | 3000 | kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 100 | kg/cm²(MPa)[Lb/in²] | |
| Elongation at Break | ASTM D638/ISO 527 | 3.9 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Combustibility (rate) | UL 94 | HB(0.4mm) | ||
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 82 | ℃(℉) |
| HDT | ASTM D648/ISO 75 | 92 | ℃(℉) | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792/ISO 1183 | 1.20 | ||
| Shrinkage rate | ASTM D955 | 0.2-0.4 | % | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 14 | g/10min | |
| Water absorption rate | ASTM D570/ISO 62 | 0.2 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.