PA66 Alloy Orgalloy® RS 6635A ARKEMA FRANCE

Properties:
Filler
Arkema
France
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ISO 11832	1310 kg/m³
Melt volume flow rate		ISO 11332	6.00 cm³/10min
Water absorption rate	Saturation	ISO 622	1.7 %
Water absorption rate	Water absorption rate	Equilibrium	ISO 622	0.70 %

flammability	Test Condition	Test Method	Test Result
Burning Behav.		ISO 12102	HB
Burning Behav.atthicknessh		ISO 12102	HB

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-22	-- MPa
tensile strength	Break	ISO 527-22	-- MPa
Tensile strain	Break	ISO 527-22	-- %
Tensile creep modulus		ISO 899-12	-- MPa
Tensile creep modulus	Tensile creep modulus		ISO 899-12	-- MPa

Electrical performance	Test Condition	Test Method	Test Result
Dissipation Factor		IEC 602502	--
Dissipation Factor	Dissipation Factor		IEC 602502	--
Compared to the Leakage Tracking Index (CTI)		IEC 601122
Surface Resistivity		IEC 600932	-- ohms
Volume resistivity		IEC 600932	-- ohms·m
dielectric strength		IEC 60243-12	34 kV/mm
relative permittivity		IEC 602502	--
relative permittivity	relative permittivity		IEC 602502	--

Thermal performance	Test Condition	Test Method	Test Result
vicat		ISO 3062	200 °C
Heat distortion temperature		ISO 75-22	225 °C
melting temperature		ISO 11357-32	255 °C
Linear coefficient of thermal expansion		ISO 11359-22	1.7E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ISO 11359-22	1E-04 cm/cm/°C
Heat distortion temperature		ISO 75-22	245 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top