PE EVOH/PureTherm® 3007C EV5 Tekni-Films, a div of Tekni-Plex

Compare

Technical Data Sheet

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	HDT	ASTM D1637	75 °C
cold shock			Good

Physical properties	Test Condition	Test Method	Test Result
density			1.22to1.31 g/cm³

film	Test Condition	Test Method	Test Result
free shrinkage		ASTM D2732	-4.0-4.0 %
Water vapor permeability		ASTME96	2.2 g/m²/24hr
Oxygen permeability rate	23°C,250μm,100%RH，湿	ASTMF1927	1.64 cm³/m²/24hr
tensile strength	Yield	ASTM D882	48.0 MPa
film thickness			127to1070 µm

Supplementary Information	Test Condition	Test Method	Test Result
Temperature			100to175 °C
RollWidth			<965 mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top