Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | ISO 1183/A | 1.20 g/cm³ |
melt mass-flow rate | | ISO 1133 | 4.0 g/10min |
hardness | Test Condition | Test Method | Test Result |
---|
Shore hardness | | ISO 7619 | 50 |
flammability | Test Condition | Test Method | Test Result |
---|
Limiting Oxygen Index | | ASTM D2863 | 27 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
tensile strength | | IEC 811-1-1 | 15.0 MPa |
Tensile strain | | IEC 811-1-4 | >30 % |
tensile strength | | IEC 811-1-1 | 17.0 MPa |
Tensile strain | | IEC 811-1-1 | 500 % |
Tensile strain | | IEC 811-1-1 | 330 % |
Electrical performance | Test Condition | Test Method | Test Result |
---|
Volume resistivity | | ASTM D257 | 1E+15 ohms·cm |
dielectric strength | | ASTM D149 | 25 kV/mm |
dielectric constant | | ASTM D150 | 2.90 |
Thermal performance | Test Condition | Test Method | Test Result |
---|
thermosetting | | IEC 540 | 30 % |
thermosetting | | IEC 540 | <10 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.