
COP 1420R ZEON JAPAN
254
Form:Granules | Grade:Injection grade
Properties:
Ozone resistantLow tenderness
Typical Applications:
Automotive Applicationspipeline
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive Applications | pipeline |
| Properties: | Ozone resistant | Low tenderness |
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| transmissivity | 3000μm | ASTM D1003 | 92.0 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ISO 527-2 | 2400 | Mpa | |
| tensile strength | ISO 527-2 | 61.0 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 20 | % |
| Bending modulus | ISO 178 | 2200 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD | ASTME831 | 7E-05 | cm/cm/°C |
| Glass transition temperature | JISK7121 | 136 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 280°C/2.16kg | JISK6719 | 17 | g/10min |
| Water absorption rate | Equilibrium | ASTM D570 | <0.010 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric constant | 1.00GHz | ASTM D150 | 2.30 | |
| Dissipation factor | 1.00GHz | ASTM D150 | <1.0E-3 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.