PP SW75AV CARMEL OLEFINS ISRAEL

Form：Granules | Grade：Injection grade

Properties:

AntistaticLow warpageImpact copolymerHigh rigidityHigh impact resistanceLow shrinkageImpact copolymerGood rigidity and impact Low shrinkageLow warpageAntistatic

Typical Applications:

Household goodsThin-walled container

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Household goods \| Thin-walled container
Properties:	Antistatic \| Low warpage \| Impact copolymer \| High rigidity \| High impact resistance \| Low shrinkage \| Impact copolymer \| Good rigidity and impact \| Low shrinkage \| Low warpage \| Antistatic

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230℃，2.16kg	ASTM D-1238	65	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	50mm/min	ASTM D-638	24	Mpa
elongation	50mm/min	ASTM D-638	8	%
Bending modulus		ASTM D-790	1200	Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	75	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-20℃	ASTM D-256	45	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature	10N	ASTM D-1525	147	°C
Hot deformation temperature	0.45MPa	ASTM D-648	95	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top