PC/ABS CY6414-111 SABIC INNOVATIVE NANSHA

Form：Granules

Properties:

High temperature resistanHigh mobility

Typical Applications:

Electrical applicationsHome appliance components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical applications \| Home appliance components
Properties:	High temperature resistan \| High mobility

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	0°C	ISO 179/1eA	17	kJ/m²
	Charpy Notched Impact Strength	23°C	ISO 179/1eA	28	kJ/m²
	Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179/1eA	12	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.2mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	2.5mm	UL 94	5VB
Burning wire flammability index	0.75mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	0.75mm	IEC 60695-2-13	775	°C
	Hot filament ignition temperature	1.5mm	IEC 60695-2-13	775	°C
	Hot filament ignition temperature	Hot filament ignition temperature	3.0mm	IEC 60695-2-13	775	°C
Extreme Oxygen Index		ISO 4589-2	32	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ASTM D638	2330	Mpa
tensile strength	Yield	ASTM D638	64.0	Mpa
tensile strength	tensile strength	Break	ASTM D638	62.0	Mpa
elongation	Yield	ASTM D638	6.0	%
Tensile strain	Yield	ISO 527-2/50	5.7	%
elongation	Break	ASTM D638	85	%
Tensile strain	Break	ISO 527-2/50	>100	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	118	°C
Vicat softening temperature	--	ISO 306/B50	134	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	135	°C
Ball Pressure Test	125°C	IEC 60695-10-2	Pass
Ball Pressure Test	Ball Pressure Test	125°C5	IEC 60695-10-2	Pass
Linear coefficient of thermal expansion	MD：-40to40°C	ISO 11359-2	7E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：-40to40°C	ISO 11359-2	7E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	260°C/5.0kg	ASTM D1238	14	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Hot wire ignition	HWI	UL 746	PLC 2
Surface resistivity		IEC 60093	0.0to4.0E+16	ohms
Dielectric constant	1kHz	ASTM D150	3.01
Dielectric constant	Dielectric constant	1MHz	ASTM D150	2.95
Dissipation factor	1kHz	ASTM D150	1.7E-03
	Dissipation factor	1MHz	ASTM D150	8.8E-03
	Dissipation factor	Dissipation factor	1MHz	IEC 60250	8.8E-03
Compared to the anti leakage trace index	CTI	UL 746	PLC 3
High arc combustion index	HAI	UL 746	PLC 1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top