PP 7633-3 LCY TAIWAN

Form：Granules | Grade：Injection grade

Properties:

High impact resistanceAging resistanceheat-resistingLow temperature resistanc

Typical Applications:

Pipeline componentsAutomotive sectorPlastic boxPlastic bottlePipeline systemApplication in the automotive fieldLoading boxsheetbottlefurniture

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Pipeline components \| Automotive sector \| Plastic box \| Plastic bottle \| Pipeline system \| Application in the automotive field \| Loading box \| sheet \| bottle \| furniture
Properties:	High impact resistance \| Aging resistance \| heat-resisting \| Low temperature resistanc

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ASTM D256	160	J/m
Suspended wall beam without notch impact strength	-18°C	ASTM D256	1300	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	25.5	Mpa
elongation	Yield	ASTM D638	7.0	%
Bending modulus		ASTM D790	1300	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D648	90	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	0.896	g/cm³
melt mass-flow rate	230°C/2.16kg	ASTM D1238	3.0	g/10min
Shrinkage rate	MD	ASTM D955	1.4	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	79
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Dart impact	-29°C	Internal Method	32.5	J

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top