PEEK AV-651 GF30 BG 20
0
- Properties:30% glass fiber reinforcedwith good chemical resistance
- Usages:Electronic and electrical componentsindustrial components
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.52 g/cm | |
| melt mass-flow rate | ASTM D1238 | 9.0 g/10min | |
| Shrinkage rate | ASTM D955 | 0.3 % | |
| ASTM D955 | 0.70 % | ||
| Water absorption rate | ASTM D570 | 0.20 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 156 MPa | |
| elongation at break | ASTM D638 | 2.9 % | |
| Flexural modulus | ASTM D790 | 9400 MPa | |
| bending strength | ASTM D790 | 234 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 107 J/m | |
| Tensile modulus | ASTM D638 | 9900 MPa | |
| Suspended wall beam without notch impact strength | ASTM D256 | 960 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature (HDT) | ASTM D648 | 213 ℃ | |
| Glass Transition Temperature | ASTM D3418 | 158 ℃ | |
| melting temperature | ASTM D3418 | 340 ℃ | |
| Coefficient of expansion | ASTM E831 | 0.000017 cm/cm/℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top