Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.50 g/cm³ |
| Shrinkage rate | | DIN16901 | 0.10到0.30 % |
| Water absorption rate | | | <0.10 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 18000 MPa |
| Tensile stress | Break | ISO527-2 | 190 MPa |
| Tensile strain | Yield | ISO527-2 | 1.7 % |
| Flexural modulus | | ISO178 | 15000 MPa |
| Bending stress | | ISO178 | 260 MPa |
| Bending Strain | | ISO178 | 2.2 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1fU | 25 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1fU | 30 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | <1.0E+4 ohms |
| insulation resistance | | IEC60167 | <1.0E+5 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Continuous use temperature | | UL746B | 255 °C |
| vicat | | ISO306/A | 320 °C |
| | DIN53752 | 5E-06 cm/cm/°C |
| | ISO75-2/A | 305 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare