PC SCANTEC PC S75R GF10 V0
0
- Properties:Fillerglass fiber reinforced material10%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.30 g/cm³ | |
| Shrinkage rate | ISO 294-4 | 0.20to0.60 % | |
| ISO 294-4 | 0.20to0.60 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | |
| Hot filament ignition temperature | IEC 60695-2-13 | 960 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 527-2 | 45.0 MPa | |
| Tensile strain | Break | ISO 527-2 | 7.0 % |
| Flexural modulus | ISO 178 | 3500 MPa | |
| bending strength | ISO 178 | 120 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 7.0 kJ/m² | |
| ISO 179 | 7.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306/B50 | 143 °C | |
| Heat distortion temperature | ISO 75-2/B | 140 °C | |
| ISO 75-2/A | 131 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top