Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
FNCT | | ISO 16770 | 8.0 hr |
FNCT | | ISO 16770 | 12.0 hr |
FNCT | | ISO 16770 | 100 |
melt mass-flow rate | | ISO 1133 | 16 g/10min |
melt mass-flow rate | | ISO 1133 | 0.80 g/10min |
Environmental stress cracking resistance | | ASTM D1693 | 500 hr |
density | | ISO 1183 | 0.952 g/cm³ |
melt mass-flow rate | | ISO 1133 | 0.16 g/10min |
hardness | Test Condition | Test Method | Test Result |
---|
Shore hardness | | ISO 868 | 60 |
Supplementary Information | Test Condition | Test Method | Test Result |
---|
BlownFilmMeltTemperature | | | 200to220 °C |
Inflation ratio (BUR) | | | >4.0:1.0 |
film | Test Condition | Test Method | Test Result |
---|
tensile strength | | ISO 527-3 | 60.0 MPa |
tensile strength | | ISO 527-3 | 43.0 MPa |
Dart impact | | ISO 7765-1 | 85 g |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ISO 75-2/A | 46.0 °C |
vicat | | ISO 306 | 125 °C |
melting temperature | | ISO 11357-3 | 130 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.