PC/ABS CG100

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
MeltViscosity		ISO11443-A	190 Pa·s
density		ISO1183	1.14 g/cm³
Melt volume flow rate		ISO1133	27.0 cm³/10min
Shrinkage rate		ISO2577	0.55to0.75 %
Shrinkage rate	Shrinkage rate		ISO2577	0.55to0.75 %
Water absorption rate		ISO62	0.70 %
Water absorption rate	Water absorption rate		ISO62	0.20 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile strain		ISO527-2/50	4.7 %
Tensile strain	Tensile strain		ISO527-2/50	>50 %
Tensile modulus		ISO527-2/1	2500 MPa
Tensile stress		ISO527-2/50	62.0 MPa
Tensile stress	Tensile stress		ISO527-2/50	50.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ISO180/A	14 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180/A	42 kJ/m²
		ISO180	NoBreak

Electrical performance	Test Method	Test Result
Surface Resistivity	IEC60093	1E+17 ohms
Volume resistivity	IEC60093	1E+16 ohms·cm
dielectric strength	IEC60243-1	45 kV/mm
CTI	IEC60112	175 V

Thermal performance	Test Condition	Test Method	Test Result
		ISO11359-2	7.2E-05 cm/cm/°C
			ISO75-2/B	127 °C
				ISO75-2/A	108 °C
vicat		ISO306/B50	128 °C
vicat	vicat		ISO306/B120	130 °C
		ISO11359-2	7.2E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top