PA66 2020GC6 UBE JAPAN

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforced

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Glass fiber reinforced

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		UBEmethod	1.3	%
Water absorption rate		ASTM D-570	5.5	%
Shrinkage rate		UBEmethod	0.5	%
Water absorption rate		ASTM D-570	0.6	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256/ISO 179	9	kg·cm/cm(J/M)ft·lb/in
Rockwell hardness		ASTM D785	120
Bending modulus		ASTM D790/ISO 178	850000	kg·cm/cm(J/M)ft·lb/in
bending strength		ASTM D790/ISO 178	2600	kg·cm/cm(J/M)ft·lb/in
Impact strength of cantilever beam gap	23°	ASTM D-256	9.0	Kgf.cm/cm
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°	ASTM D-256	13	Kgf.cm/cm
tensile strength	23°，Yield	ASTM D-638	1800	Kgf/cm
tensile strength	tensile strength	23°，Yield	ASTM D-638	1300	Kgf/cm
Rockwell hardness	23°	ASTM D-785	120
	Rockwell hardness	23°	ASTM D-785	113
	Rockwell hardness	Rockwell hardness	23°	ASTM D-785	100
Bending modulus	23°	ASTM D-790	55000	Kgf/cm
Squeezing shear strength	23°	ASTM D-732	850	Kgf/cm
bending strength	23°	ASTM D-790	2600 1900	Kgf/cm
Bending modulus	23°	ASTM D-790	85000	Kgf/cm
bending strength	23°	ASTM D-790	1900	Kgf/cm
Elongation at Break	23°	ASTM D-638	5	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D648/ISO 75	255	℃（℉）
Melting temperature			255-265	℃（℉）
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	2.5	mm/mm.℃
Burning rate		UL 94	HB
Linear coefficient of thermal expansion		ASTM D-696	2.5	X的10
Melting temperature	DSC		255-265	°C
Hot deformation temperature	18.6kgf/cm	ASTM D-648	255	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.36
Water absorption rate		ASTM D570/ISO 62	0.6	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257/IEC 60093	10^15	Ω.cm
Dielectric constant	10	ASTM D-150	3.7
Dielectric loss	10	ASTM D-150	0.01
Volume resistivity		ASTM D-257	10	Ω.cm
Dielectric constant	10	ASTM D-150	4.1
Dielectric constant	Dielectric constant	60HZ	ASTM D-150	4.2
Dielectric loss	10	ASTM D-150	0.02
Dielectric loss	Dielectric loss	60HZ	ASTM D-150	0.01
Arc resistance		ASTM D-495	127	S
Compared to the Leakage Traceability Index (CTI)		UL 746	600	V

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top