LDPE Trithene® TS 7006
0
- Usages:Food packagingfilmpackaging
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 0.924 g/cm³ | |
| ASTMD1238 | 0.60 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Haze ratio | ASTMD1003 | 9.0 ％ | |
| gloss | ASTM2457 | 60 % | |
| ASTM2457 | 84 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Secant modulus | ASTMD882 | 140 MPa | |
| ASTMD882 | 170 MPa | ||
| Tensile strength at break of thin film | ASTMD882 | 25.0 MPa | |
| ASTMD882 | 23.0 MPa | ||
| Elongation at break of thin film | ASTMD882 | 350 % | |
| ASTMD882 | 700 % | ||
| Elmendorf tear strength | ASTMD1922 | 310 g | |
| ASTMD1922 | 250 g | ||
| ASTMD1922 | 6.20 g/micron | ||
| ASTMD1922 | 5.00 g/micron |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| material temperature | 180-185 °C | ||
| Falling hammer impact | ASTMD1709 | 3.40 g/micron | |
| falling weight impact test | ASTMD1709 | 170 g | |
| Size of nozzle opening | 0.100 cm | ||
| Inflation ratio (BUR) | 2.0-3.0 | ||
| temperature range | 150-185 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top