Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD1928 | 1.16到1.18 g/cm³ |
| Mooney viscosity | | ISO289 | 14到22 MU |
| water content | | 内部方法 | <800 ppm |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore A | ASTMD2240 | 85到90 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Rheometer | | ISO6502 | 0.200到0.341 J |
| Rheometer | | ISO6502 | 0.0330到0.0550 J |
| Rheometer | | ISO6502 | 1.4到1.6 min |
| Rheometer | | ISO6502 | 180 ° |
| Stripping | | | 2.3到2.5 kN/m |
| Stripping | | | 1.3到1.7 kN/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 11.0 MPa |
| elongation | Break | ASTMD638 | 250 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength in air | | ASTMD638 | -5.0 % |
| Change rate of ultimate elongation in air | | ASTMD638 | -50 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | <5.0E+2 ohms·cm |
| Volume resistivity | | ASTMD257 | <1.0E+3 ohms·cm |
| Volume resistivity | | ASTMD257 | <1.0E+3 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| thermosetting | | IEC60540 | <100 % |
| thermosetting | | IEC60540 | <5.0 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare