Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.56 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 25 g/10min |
| Shrinkage rate | | ASTMD955 | 0.40 % |
| Shrinkage rate | | ASTMD955 | 0.70 % |
| Water absorption rate | | ASTMD570 | 0.17 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | 750 °C |
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 7000 MPa |
| tensile strength | Break | ASTMD638 | 100 MPa |
| elongation | Break | ASTMD638 | 3.5 % |
| Flexural modulus | | ASTMD790 | 6000 MPa |
| bending strength | | ASTMD790 | 170 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 10.0 kJ/m² |
| Suspended wall beam without notch impact strength | | ASTMD256 | 60.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1.2E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 20 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 219 °C |
| | ASTMD648 | 204 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare