Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.28 g/cm³ |
| PVC unit classification | | ASTM D4216 | 4-22224-53-0000 |
| PVC unit classification | | ASTM D1784 | 13255 |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 80 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | | 可接受 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Dart impact | | ASTM D4226 | 67.2 J/cm |
| Impact strength of cantilever beam gap | | ASTM D256A | 88 J/m |
| Dart impact | | ASTM D4226 | 67.2 J/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTM D638 | 41.3 MPa |
| Flexural modulus | | ASTM D790 | 2830 MPa |
| bending strength | | ASTM D790 | 76.5 MPa |
| Tensile modulus | | ASTM D638 | 2900 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 87.8 °C |
| Heat distortion temperature | | ASTM D648 | 91.7 °C |
| Heat distortion temperature | | ASTM D648 | 81.1 °C |
| Heat distortion temperature | | ASTM D648 | 85.0 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 6.7E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare