PBT 1100-210M JIANGSU CHANGCHUN

Form：Granules | Grade：Injection grade

Properties:

dimensional stability high strengthHigh toughnessChemical resistanceHigh rigidityheat-resistingcurrencyHigh viscosityPhysical strength and touThe surface of the formedHigh viscosityPhysical strength and touThe surface of the formed

Typical Applications:

Computer accessoriesEngine hood partsAdhesive plasticFastener assemblyComputer keyboardStationery shellKnob switch.

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Computer accessories \| Engine hood parts \| Adhesive plastic \| Fastener assembly \| Computer keyboard \| Stationery shell \| Knob switch.
Properties:	dimensional stability \| high strength \| High toughness \| Chemical resistance \| High rigidity \| heat-resisting \| currency \| High viscosity \| Physical strength and tou \| The surface of the formed \| High viscosity \| Physical strength and tou \| The surface of the formed

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		ASTM D-570	0.06	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness		ASTM D-785	85-90	M-scale
bending strength		ASTM D-790	750-850	kg/cm
Bending modulus		ASTM D-790	23000	kg/cm
Elongation at Break		ASTM D-638	120-180	%
tensile strength		ASTM D-638	500-600	kg/cm
Impact strength of cantilever beam gap		ASTM D-256	5.0-6.0	kg.cm/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Flame resistance		UL 94	HB
Melting temperature		DSC	225	°C
Hot deformation temperature	18.6Kg/cm	ASTM D-648	60	°C
Hot deformation temperature	Hot deformation temperature	4.6Kg/cm	ASTM D-648	155	°C
Linear coefficient of thermal expansion		ASTM D-696	9	10
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D-955	0.8-2.0	%
density		ASTM D-792	1.30-1.32
Fiberglass content		Ash	0	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		ASTM D-495	120	sec
Surface resistivity		ASTM D-257	>10	Ω
Volume resistivity		ASTM D-257	>10	Ω.cm
Induced positive connection	60Hz	ASTM D-150	0.001
Dielectric constant	60Hz	ASTM D-150	3.3
Dielectric strength		ASTM D-149	20	KV/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top