Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.85到1.95 g/cm³ |
| Tightening rate | | ASTMD1895 | 1.5 |
| Shrinkage rate | | ASTMD955 | 0.050到0.15 % |
| Water absorption rate | | ASTMD570 | 0.12 % |
| colour | | | 1.0到1.5 |
| colour | | | 1.2到1.7 |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | ASTMD2583 | 45到55 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTMD790 | 124到138 MPa |
| Compression Modulus | | ASTMD695 | 345000到379000 MPa |
| compressive strength | | ASTMD695 | 96.5到110 MPa |
| shear strength | | ASTMD732 | 55.2到62.1 MPa |
| tensile strength | | ASTMD638 | 34.5到41.4 MPa |
| Flexural modulus | | ASTMD790 | 12400到13100 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 430到530 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Inclined-PlaneTracking | | ASTMD2303 | >1000 min |
| dielectric strength | | ASTMD149 | >14 kV/mm |
| arc resistance | | ASTMD495 | >185 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | >260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare