PA66 LNP™ LUBRICOMP™ RFL4536 SABIC INNOVATIVE NANSHA
180
- Properties:Thermal stabilityFlame retardant
- Usages:Automotive componentsElectronic and electrical accessories
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.20 % | |
| ASTM D955 | 1.0 % | ||
| ISO 294-4 | 0.97 % | ||
| ISO 294-4 | 0.21 % | ||
| Water absorption rate | ASTM D570 | 0.78 % | |
| ISO 62 | 1.2 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D790 | 195 Mpa | |
| coefficient of friction | ASTM D3702Modified | 0.56 | |
| ASTM D3702Modified | 0.48 | ||
| Wear factor | ASTM D3702Modified | 11.0 10^-10in^5-min/ft-lb-hr | |
| Tensile modulus | ASTM D638 | 10500 Mpa | |
| ISO 527-2/1 | 9800 Mpa | ||
| Flexural modulus | ASTM D790 | 7580 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 9.0 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 50 kJ/m² | |
| Dart impact | ASTM D3763 | 7.00 J | |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 5.00 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 233 °C | |
| ISO 75-2/Af | 236 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top