PC/ABS XCY620S-76701 SABIC INNOVATIVE NANSHA

Form：Granules

Properties:

High temperature resistanHigh mobility

Typical Applications:

Electrical applicationsHome appliance components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical applications \| Home appliance components
Properties:	High temperature resistan \| High mobility

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	NoBreak
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	40	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	55	kJ/m²
Dart impact	-30°C,TotalEnergy	ASTM D3763	65.0	J
Dart impact	Dart impact	23°C,TotalEnergy	ASTM D3763	55.0	J
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	45	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	60	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2/1	2200	Mpa
tensile strength	Yield	ISO 527-2/50	54.0	Mpa
tensile strength	tensile strength	Break	ISO 527-2/50	56.0	Mpa
Tensile strain	Yield	ISO 527-2/50	4.5	%
Tensile strain	Tensile strain	Break	ISO 527-2/50	100	%
Bending modulus	50.0mmSpan	ASTM D790	2300	Mpa
Bending modulus	Bending modulus		ISO 178	2200	Mpa
bending strength		ISO 178	82.0	Mpa
bending strength	bending strength	Yield,50.0mmSpan	ASTM D790	86.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed,3.20mm	ASTM D648	128	°C
	Hot deformation temperature	0.45MPa,Unannealed,64.0mmSpan	ISO 75-2/Bf	126	°C
		Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	108	°C
		Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	106	°C
Vicat softening temperature		ASTM D15259	129	°C
Vicat softening temperature	Vicat softening temperature		ISO 306/B120	130	°C
Ball Pressure Test	75°C	IEC 60695-10-2	Pass
Ball Pressure Test	Ball Pressure Test	100°C10	IEC 60695-10-2	Pass
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	7E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：-40to40°C	ASTME831	7E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Melt Volume Flow Rate (MVR)	260°C/5.0kg	ISO 1133	20.0	cm3/10min
Melt Volume Flow Rate (MVR)	Melt Volume Flow Rate (MVR)	265°C/5.0kg	ISO 1133	25.0	cm3/10min
Shrinkage rate	MD：3.20mm	Internal Method	0.50-0.70	%
Shrinkage rate	Shrinkage rate	TD：3.20mm	Internal Method	0.50-0.70	%
Water absorption rate	23°C,24hr	ISO 62	0.30	%
	Water absorption rate	Saturation,23°C	ISO 62	0.40	%
	Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.13	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	>1.0E+16	ohms
Volume resistivity		IEC 60093	>1.0E+16	ohms·cm
Dielectric strength	0.800mm,in Oil	IEC 60243-1	39	KV/mm
	Dielectric strength	1.60mm,in Oil	IEC 60243-1	25	KV/mm
	Dielectric strength	Dielectric strength	3.20mm,in Oil	IEC 60243-1	17	KV/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top