
POM EC140 CELANESE GERMANY
117
Form:Granules | Grade:Injection grade
Properties:
Chemical resistanceantioxidantHydrolysis resistanceFiller: Carbon fiber rein10%Filler by weight
Typical Applications:
Bottle capElectrical applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Bottle cap | Electrical applications |
| Properties: | Chemical resistance | antioxidant | Hydrolysis resistance | Filler: Carbon fiber rein | 10% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| characteristic | 耐磨 | |||
| purpose | 用于工业用途 | |||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 23°C | ISO 178 | 8500 | Mpa |
| Tensile strain | Break | ISO 527-2/1A/5 | 1.5 | % |
| tensile strength | Break | ISO 527-2/1A/5 | 70.0 | Mpa |
| Tensile modulus | ISO 527-2/1A/1 | 8500 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | ISO 11357-3 | 165 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 158 | °C |
| 0.45MPa,Unannealed | ISO 75-2/B | 162 | °C | |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1E-04 | cm/cm/°C |
| MD | ISO 11359-2 | 3E-05 | cm/cm/°C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | ISO 294-4 | 0.80 | % |
| TD | ISO 294-4 | 1.0 | % | |
| Melt Volume Flow Rate (MVR) | 190°C/2.16kg | ISO 1133 | 12.0 | cm3/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | IEC 60093 | 2E+03 | ohms·cm | |
| Surface resistivity | IEC 60093 | 1E+03 | ohms |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.