Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | % | 0.020到0.16 |
| melt mass-flow rate | | g/10min | 6.2到7.0 |
| Shrinkage rate | | mm/mm | 101.6E-3到1.016 |
| K-Value | | | 56.5到80.3 |
| | ml/g | 83.1到161.4 |
| Apparent density | | | 1.16到1.50 |
| Apparent density | | | 1.16到1.50 |
| Water absorption rate | | % | 0.020到0.16 |
| melt mass-flow rate | | g/10min | 6.2到7.0 |
| Shrinkage rate | | mm/mm | 101.6E-3到1.016 |
| K-Value | | | 56.5到80.3 |
| | ml/g | 83.1到161.4 |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | | 12到108 |
| | | 48到97 |
| | | 12到108 |
| | | 48到97 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| Haze ratio | | % | 1.5到3.0 |
| transmissivity | | % | 88.8到90.1 |
| Haze ratio | | % | 1.5到3.0 |
| transmissivity | | % | 88.8到90.1 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| burning rate | | mm/min | 4.318到6.35 |
| burning rate | | mm/min | 4.318到6.35 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| yield | | Mpa | 8.0到42.76 |
| fracture | | Mpa | 4.0到20.83 |
| fracture | | Mpa | 5.52到32.14 |
| yield | | Mpa | 32.97到62.0 |
| yield | | Mpa | 55.38到94.48 |
| fracture | | % | 200到410 |
| fracture | | % | 180到470 |
| yield | | % | 290到460 |
| fracture | | % | 200到410 |
| fracture | | % | 180到470 |
| yield | | % | 290到460 |
| yield | | Mpa | 8.0到42.76 |
| fracture | | Mpa | 4.0到20.83 |
| fracture | | Mpa | 5.52到32.14 |
| yield | | Mpa | 32.97到62.0 |
| yield | | Mpa | 55.38到94.48 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | kJ/m² | 2.414到5.572 |
| | kJ/m² | 2.414到4.643 |
| | N.m/mil | 12.57到53.10 |
| Impact strength of cantilever beam gap | | kJ/m² | 1.582到14.532 |
| Impact strength of simply supported beam without notch | | kJ/m² | 2.414到5.572 |
| | kJ/m² | 2.414到4.643 |
| | N.m/mil | 12.57到53.10 |
| Impact strength of cantilever beam gap | | kJ/m² | 1.582到14.532 |
| film | Test Condition | Test Method | Test Result |
|---|
| elongation | Break | % | 100到120 |
| Water vapor permeability | | g/100 | 0.17到0.25 |
| tensile strength | Yield | Mpa | 49.66到60.83 |
| elongation | Break | % | 100到120 |
| Water vapor permeability | | g/100 | 0.17到0.25 |
| tensile strength | Yield | Mpa | 49.66到60.83 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | V/mil | 340到1000 |
| Volume resistivity | | | 2.75到3.40 |
| dielectric strength | | V/mil | 340到1000 |
| Volume resistivity | | | 2.75到3.40 |
| Test Condition | Test Method | Test Result |
|---|
| elongation | | % | 220到390 |
| tensile strength | | Mpa | 7.86到23.59 |
| compression set | | % | 47到48 |
| tensile strength | | Mpa | 7.86到23.59 |
| elongation | | % | 220到390 |
| compression set | | % | 47到48 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Continuous use temperature | | °C | 59到105 |
| | mm/mm/°C | 88.9E-5到101.6E-5 |
| brittle temperature | | °C | -50到-4 |
| melting temperature | | °C | 158到185 |
| melting temperature | | °C | 158到185 |
| Continuous use temperature | | °C | 59到105 |
| | mm/mm/°C | 88.9E-5到101.6E-5 |
| brittle temperature | | °C | -50到-4 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare