PP Copolymer ADDILENE PMD 50284 ADDIPLAST FRANCE

Properties:

Filler mineral filler

Typical Applications:

General

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	General
Properties:	Filler \| mineral filler

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ISO 180/1A	6.0	kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	40	kJ/m²
Charpy Notched Impact Strength		ISO 179/1eA	6.5	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ISO 178	2500	MPa
Tensile strain	Break	ISO 527-2	50	%
tensile strength	Break	ISO 527-2	15.0	MPa
tensile strength	tensile strength	Yield	ISO 527-2	21.0	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/Af	72.0	°C
Melting temperature		ISO 3146	165	°C
Vicat softening temperature		ISO 306/A50	152	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230°C/2.16kg	ISO 1133	10	g/10min
density		ISO 1183/A	1.08	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 0
Volume resistivity		IEC 60093	1E+14	ohms·cm
Surface resistivity		IEC 60093	1E+14	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ISO 868	69

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top