PP TIRIPRO® S2040
118
- Properties:heat-resistinghigh strengthHigh temperature resistanHigh impact resistance
- Usages:Sanitary materialsNon-woven fabricchipTV casing
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 优等品｜32.0-43.0 g/10min | ||
| 一等品｜32.0-43.0 g/10min | |||
| 合格品｜30.0-38.0 g/10min |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| cleanliness | 一等品｜≤10 粒/kg树脂 | ||
| 合格品｜≤20 粒/kg树脂 | |||
| fish eye | 优等品｜≤20 个/1520cm2 | ||
| 一等品｜≤40 个/1520cm2 | |||
| 合格品｜≤60 个/1520cm2 | |||
| 优等品｜≤4 个/1520cm2 | |||
| 一等品｜≤8 个/1520cm2 | |||
| 合格品｜≤16 个/1520cm2 | |||
| cleanliness | 优等品｜≤20 粒/kg树脂 | ||
| 一等品｜≤40 粒/kg树脂 | |||
| 合格品｜≤60 粒/kg树脂 | |||
| Yellowness Index | 优等品｜实测 % | ||
| 一等品｜实测 % | |||
| 合格品｜实测 % | |||
| cleanliness | 优等品｜≤5 粒/kg树脂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | 合格品｜≥10.0 kJ/m² | ||
| Flexural modulus | 优等品｜实测 GPa | ||
| 一等品｜实测 GPa | |||
| 合格品｜实测 GPa | |||
| elongation | 优等品｜≥20 % | ||
| 一等品｜≥18 % | |||
| 合格品｜≥18 % | |||
| tensile strength | 优等品｜≥34.0 Mpa | ||
| 一等品｜≥31.0 Mpa | |||
| 合格品｜≥30.0 Mpa | |||
| Rockwell hardness | 优等品｜实测 R | ||
| 一等品｜实测 R | |||
| 合格品｜实测 R | |||
| Impact strength of cantilever beam gap | 优等品｜≥13.5 kJ/m² | ||
| 一等品｜≥10.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | 优等品｜实测 °C | ||
| 一等品｜实测 °C | |||
| 合格品｜实测 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top