Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.18 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.50to0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 112 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmissivity | | ASTMD1003 | 90.0 % |
| Haze ratio | | ASTMD1003 | <1.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180 | 93 kJ/m² |
| Impact strength of cantilever beam gap | | ASTMD4812 | NoBreak |
| Impact strength of cantilever beam gap | | ASTMD256 | 980 J/m |
| Impact strength of cantilever beam gap | | ISO180 | 20 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 1550 MPa |
| tensile strength | | ASTMD638 | 43.0 MPa |
| Tensile stress | | ISO527-2 | 47.0 MPa |
| elongation | | ASTMD638 | 6.0 % |
| Tensile strain | | ISO527-2 | 7.0 % |
| elongation | | ASTMD638 | 210 % |
| Tensile strain | | ISO527-2 | 190 % |
| Flexural modulus | | ASTMD790 | 1550 MPa |
| Flexural modulus | | ISO178 | 1500 MPa |
| Bending stress | | ISO178 | 59.0 MPa |
| bending strength | | ASTMD790 | 62.0 MPa |
| Tensile modulus | | ASTMD638 | 1550 MPa |
| tensile strength | | ASTMD638 | 53.0 MPa |
| Tensile stress | | ISO527-2 | 58.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTMD648 | 99.0 °C |
| Heat distortion temperature | | ASTMD648 | 85.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare