POM F30-03 PTM NANTONG

Form：Granules | Grade：Injection grade

Properties:

High mobilityThermal stabilitywear resistantHigh rigidityHigh impact resistancecurrency

Typical Applications:

Thin walled products

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Thin walled products
Properties:	High mobility \| Thermal stability \| wear resistant \| High rigidity \| High impact resistance \| currency

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
elongation	Break	ASTM D638	50	%
Bending modulus		ASTM D790	378	psi
bending strength		ASTM D790	13.2	psi
Impact strength of cantilever beam gap		ASTM D256	1.01	ft.ib/in
Rockwell hardness		ASTM D785	80
tensile strength		ASTM D638	9.04	psi
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D955	0.02	in/in
melt mass-flow rate		ASTM D1238	27	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor		ASTM D150	0.007
Dielectric constant		ASTM D150	3.7
Dielectric strength		ASTM D149	483	v/mil
Volume resistivity		ASTM D257	1E+14	ohm.cm
Surface resistivity		ASTM D257	1E+16	Ohm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top