Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D1238 | 21 g/10min |
| Shrinkage rate | | 内部方法 | 0.15-0.25 % |
| Shrinkage rate | | 内部方法 | 0.25-0.50 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Dart impact | | ASTM D3763 | 14.2 J |
| Suspended wall beam without notch impact strength | | ASTM D4812 | 400 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 81.0 Mpa |
| elongation | | ASTM D638 | 4.9 % |
| Flexural modulus | | ASTM D790 | 5030 Mpa |
| bending strength | | ASTM D790 | 124 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| arc resistance | | ASTM D495 | PLC 5 |
| Compared to the Leakage Tracking Index (CTI) | | UL 746 | PLC 3 |
| High arc combustion index (HAI) | | UL 746 | PLC 3 |
| High Voltage Arc Traceability Rate (HVTR) | | UL 746 | PLC 4 |
| Hot wire ignition (HWI) | | UL 746 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| RTI | | UL 746 | 130 °C |
| Heat distortion temperature | | ASTM D648 | 141 °C |
| Heat distortion temperature | | ASTM D648 | 135 °C |
| vicat | | ASTM D15255 | 144 °C |
| Linear coefficient of thermal expansion | | ASTME831 | 2.3E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | ASTME831 | 2.5E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | ASTME831 | 4.9E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | ASTME831 | 5.6E-05 cm/cm/°C |
| RTI Elec | | UL 746 | 120 °C |
| RTI Imp | | UL 746 | 120 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare