TEEE RTP 1505-55D RTP US
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.15to0.21 % | |
| water content | <0.10 % | ||
| density | ASTM D792 | 1.42 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 65 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Primary Additive | 30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2480 MPa | |
| tensile strength | ASTM D638 | 50.7 MPa | |
| elongation | Yield | ASTM D638 | 9.2 % |
| Flexural modulus | ASTM D790 | 2340 MPa | |
| bending strength | ASTM D790 | 70.3 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 360 J/m | |
| Suspended wall beam without notch impact strength | ASTM D4812 | 无断裂 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top