
PC/ABS Romiloy® 9130 ROMIRA GERMANY
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 无断裂 | |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 20 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Hot filament ignition temperature | 2.0mm | IEC 60695-2-13 | 775 | °C |
| Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 960 | °C |
| UL flame retardant rating | 3.0mm | UL 94 | V-0 | |
| 1.6mm | UL 94 | V-0 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | 23°C | ISO 178 | 87.0 | MPa |
| Bending modulus | 23°C | ISO 178 | 2700 | MPa |
| Tensile strain | Break,23°C | ISO 527-2/50 | 70 | % |
| tensile strength | 23°C | ISO 527-2/50 | 55.0 | MPa |
| Tensile modulus | 23°C | ISO 527-2/1 | 2700 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 106 | °C |
| Ball indentation test | 125°C,3.00mm | IEC 60695-10-2 | <2.00 | mm |
| Vicat softening temperature | ISO 306/B50 | 135 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 240°C/5.0kg | ISO 1133 | 20 | g/10min |
| density | 23°C | ISO 1183 | 1.20 | g/cm³ |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.30 | % |
| Shrinkage rate | 23°C | ISO 294-4 | 0.30to0.60 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.