Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.29 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 12to17 g/10min |
| Shrinkage rate | | ASTM D955 | 0.70 % |
| Water absorption rate | | ASTM D570 | 0.37 % |
| Water absorption rate | | ASTM D570 | 1.1 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| refractive index | | ASTM D542 | 1.672 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Steam disinfection - containing morpholine | | | >1000 cycles |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 91.0 Mpa |
| Tensile modulus | | ASTM D638 | 2340 Mpa |
| tensile strength | | ASTM D638 | 69.6 Mpa |
| elongation | | ASTM D638 | 7.2 % |
| elongation | | ASTM D638 | 60to120 % |
| Flexural modulus | | ASTM D790 | 2410 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 690 J/m |
| Impact strength of cantilever beam gap | | ASTM D1822 | 399 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 9E+15 ohms·cm |
| dielectric strength | | ASTM D149 | >200 KV/mm |
| dielectric strength | | ASTM D149 | 15 KV/mm |
| dielectric constant | | ASTM D150 | 3.44 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 207 °C |
| Glass Transition Temperature | | ASTME1356 | 220 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 5.6E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices