UHMWPE B160B
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.10 g/cm3 | ||
| melt mass-flow rate | 0.50 g/10min | ||
| Shore hardness | -- |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 57.6 MPa | ||
| bending strength | 45.0 MPa | ||
| Flexural modulus | 2900-3300 MPa | ||
| elongation at break | 21.8 % | ||
| Charpy Notched Impact Strength | -- KJ/cm2 | ||
| Impact strength of cantilever beam gap | 22.11 KJ/cm2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | -80 ℃ | ||
| Wear rate of mortar method | 0.25 % | ||
| Heat distortion temperature | 141.9 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top