
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| tensile strength | 3.2mm | ASTM D638 | 75 | Mpa |
| Elongation at Break | 3.2mm | ASTM D638 | 18 | % |
| bending strength | 6.4mm | ASTM D790 | 112 | Mpa |
| Bending modulus | 6.4mm | ASTM D790 | 2646 | Mpa |
| Impact strength of cantilever beam gap | 23℃ | ASTM D256 | 160 | J/m |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Long term use temperature | 电气 | UL 746B | 105 | °C |
| 含冲击 | UL 746B | 100 | °C | |
| 无冲击 | UL 746B | 105 | °C | |
| UL flame retardant rating | UL 94 | V-0 | ||
| Hot deformation temperature | 0.45MPa | ASTM D648 | 133 | °C |
| 1.80MPa | ASTM D648 | 125 | °C | |
| Vicat softening temperature | ASTM D1525 | 150 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792 | 1.09 | ||
| Water absorption rate | 24hrs | ASTM D570 | 0.06 | % |
| Shrinkage rate | 3.2mm | ASTM D955 | 5-7 | E-3 |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric constant | 1MHz | ASTM D150 | 2.49 | |
| Volume resistivity | ASTM D257 | 2E+16 | ohm·cm | |
| Surface resistivity | D257 | 1E+16 | ohm·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.