PP Trademark PP PPH400E Trademark Plastics Corporation
0
- Usages:Beltstextile applicationsbagscarpet backingfibers
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D1505 | 0.900 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 4.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Yield | ASTM D638 | 8.6 % |
| Flexural modulus | ASTM D790 | 1310 MPa | |
| tensile strength | Yield | ASTM D638 | 34.5 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 32 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top