GPPS JC-500
0
- Properties:High floweasy demoldingmedium strengthand good transparency
- Usages:Various general-purposeespecially thin-walled injection molded partsused for blending with HIPS during extrusionand also used as a gloss layer
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 6 Cm3/10min | |
| density | ISO 1183 | 1.05 g/cm3 | |
| Water absorption rate | ISO 62(A法) | <0.1 % | |
| Shrinkage rate | 0.3-0.6 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ISO 527 | 46 MPa | |
| elongation at break | ISO 527 | 2 % | |
| Suspended wall beam without notch impact strength | ISO 180 | 11 KJ/m2 |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Injection molding melt temperature | 180-260 ℃ | ||
| Injection mold temperature | 10-60 ℃ | ||
| Melt Temperature | 200-240 ℃ |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306 | 91 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top