PP ADDILENE PMD 50265 ADDIPLAST FRANCE

Typical Applications:

Industrial applications electrical enclosures

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

Industrial applications | electrical enclosures

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength		ISO 179/1eA	7.0	kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	30	kJ/m²
Impact strength of cantilever beam gap		ISO 180/1A	7.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.60mm	UL 94	HB
Hot filament ignition temperature		IEC 60695-2-13	750	°C
Extreme Oxygen Index		ISO 4589-2	17	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ISO 527-2	30.0	MPa
Tensile strain	Break	ISO 527-2	5.0	%
Bending modulus		ISO 178	2000	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306/A50	150	°C
Melting temperature		ISO 3146	165	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/Af	90.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183/A	0.960	g/cm³
melt mass-flow rate	230°C/2.16kg	ISO 1133	16	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+13	ohms
Volume resistivity		IEC 60093	1E+15	ohms·cm
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 0
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ISO 868	68

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top