PLA+PBS Eco-Solutions GP335C
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.47 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 9.2到14 g/10min | |
| Shrinkage rate | ASTMD955 | 1.0 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD2240 | 93 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 2620 MPa | |
| tensile strength | Break | ASTMD638 | 36.2 MPa |
| elongation | Break | ASTMD638 | 5.7 % |
| Flexural modulus | ASTMD790 | 1620 MPa | |
| bending strength | Yield | ASTMD790 | 52.1 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 39 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 89.4 °C | ||
| melting temperature | 113 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top