'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
PPO V0150B-701 SABIC INNOVATIVE US
115
Form：Granules | Grade：Injection grade
Properties:
Thermal stabilityGlass fiber reinforced
Typical Applications:
medical care
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | medical care |
| Properties: | Thermal stability | Glass fiber reinforced |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 50.0 | J |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 13 | kJ/m² |
| -30°C | ISO 180/1A | 5.0 | kJ/m² | |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 14 | kJ/m² |
| -30°C | ISO 179/1eA | 5.0 | kJ/m² | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 | |
| 2.0mm | UL 94 | 5VA | ||
| Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 775 | °C |
| Extreme Oxygen Index | ISO 4589-2 | 32 | % | |
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 960 | °C |
| Hot filament ignition temperature | 1.0mm | IEC 60695-2-13 | 775 | °C |
| 2.0mm | IEC 60695-2-13 | 775 | °C | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Break | ASTM D638 | 7.0 | % |
| Tensile strain | Break | ISO 527-2/50 | 10 | % |
| Bending modulus | 50.0mmSpan | ASTM D790 | 2550 | Mpa |
| ISO 178 | 2400 | Mpa | ||
| Tensile strain | Yield | ISO 527-2/50 | 4.0 | % |
| elongation | Yield | ASTM D638 | 5.0 | % |
| tensile strength | Break | ISO 527-2/50 | 55.0 | Mpa |
| Break | ASTM D638 | 60.0 | Mpa | |
| Yield | ISO 527-2/50 | 70.0 | Mpa | |
| Yield | ASTM D638 | 70.0 | Mpa | |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | Internal Method | 35.0 | mg |
| bending strength | Yield,50.0mmSpan | ASTM D790 | 105 | Mpa |
| ISO 178 | 110 | Mpa | ||
| Tensile modulus | ASTM D638 | 2500 | Mpa | |
| ISO 527-2/1 | 2500 | Mpa | ||
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Ball Pressure Test | 140°C12 | IEC 60695-10-2 | Pass | |
| 125°C | IEC 60695-10-2 | Pass | ||
| Vicat softening temperature | -- | ISO 306/B120 | 155 | °C |
| -- | ISO 306/B50 | 145 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed,3.20mm | ASTM D648 | 135 | °C |
| 0.45MPa,Unannealed,100mmSpan | ISO 75-2/Be | 140 | °C | |
| Vicat softening temperature | -- | ISO 306/A50 | 160 | °C |
| ASTM D152511 | 155 | °C | ||
| Hot deformation temperature | 1.8MPa,Unannealed,100mmSpan | ISO 75-2/Ae | 130 | °C |
| Linear coefficient of thermal expansion | MD：-40to40°C | ASTME831 | 7.5E-05 | cm/cm/°C |
| MD：23to80°C | ISO 11359-2 | 7E-05 | cm/cm/°C | |
| TD：-40to40°C | ASTME831 | 7.5E-05 | cm/cm/°C | |
| TD：23to80°C | ISO 11359-2 | 9E-05 | cm/cm/°C | |
| thermal conductivity | ISO 8302 | 0.27 | W/m/K | |
| RTI Elec | UL 746 | 110 | °C | |
| RTI Imp | UL 746 | 105 | °C | |
| RTI Str | UL 746 | 115 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Melt Volume Flow Rate (MVR) | 300°C/5.0kg | ISO 1133 | 10.0 | cm3/10min |
| Shrinkage rate | MD：--2 | Internal Method | 0.50-0.70 | % |
| melt mass-flow rate | 280°C/5.0kg | ASTM D1238 | 3.5 | g/10min |
| Shrinkage rate | MD：3.20mm | Internal Method | 0.50-0.70 | % |
| Water absorption rate | Saturation,23°C | ISO 62 | 0.18 | % |
| Equilibrium,23°C,50%RH | ISO 62 | 0.060 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 0.800mm,in Oil | IEC 60243-1 | 33 | KV/mm |
| 1.60mm,in Oil | IEC 60243-1 | 26 | KV/mm | |
| 3.20mm,in Oil | IEC 60243-1 | 16 | KV/mm | |
| Relative permittivity | 50Hz | IEC 60250 | 2.80 | |
| 60Hz | IEC 60250 | 2.80 | ||
| 1MHz | IEC 60250 | 2.70 | ||
| Dissipation factor | 50Hz | IEC 60250 | 9E-04 | |
| 60Hz | IEC 60250 | 9E-04 | ||
| 1MHz | IEC 60250 | 3E-03 | ||
| Surface resistivity | IEC 60093 | >1.0E+15 | ohms | |
| Volume resistivity | IEC 60093 | 1E+15 | ohms·cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Ball Pressure Test | H358/30 | ISO 2039-1 | 113 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.