
SEBS EMPILON® HC80 EMPILON
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| transmissivity | 70.0 | % | ||
| elastomer | Test Condition | Test Method | Test Result | Test Unit |
| Permanent compression deformation | 23°C,70hr | ASTM D395 | 56 | % |
| tensile strength | 300%Strain | ASTM D412 | 4.31 | MPa |
| ASTM D412 | 7.35 | MPa | ||
| elongation | Break | ASTM D412 | 500 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Brittle temperature | -50.0 | °C | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792 | 0.940 | g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 10 | g/10min |
| Shrinkage rate | MD | 0.080 | % | |
| TD | 0.040 | % | ||
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreA,10Sec | ASTM D2240 | 85 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| Adhesion to PC | 2.4 | kN/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.